CWS Sliding & Patio Doors Nationwide

CWS Sliding & Patio Doors: The Fort Lauderdale Owner’s Guide

If your CWS sliding or patio door is binding, leaking, or letting humidity through, we stock and install CWS-compatible replacement parts and full door units throughout Fort Lauderdale. Depending on whether you need a roller assembly, a lock set, weatherstripping, or an entire replacement panel, most jobs here run between $85 and $1,400 installed, with full door replacements landing between $2,200 and $5,800 depending on size and impact rating. Most Fort Lauderdale owners discover the failure the same way: a door that once glided with one hand now takes both, or a puddle that keeps appearing on the tile after a summer downpour.

Call (754) 354-5397

Which CWS Models This Applies To

CWS produces sliding glass doors and patio doors across several series lines, and the parts are not interchangeable the way some homeowners assume. The two most common in Fort Lauderdale homes are the CWS 801 Series and the CWS 70 Series, both of which appear frequently in coastal and suburban Broward County construction. The 801 Series is the heavier residential product, often impact-rated with a 2-1/4 inch profile, while the 70 Series is the lighter non-impact line with a slimmer 1-3/4 inch frame. Before you order anything, pull the label off the inside edge of the door panel: it will list the series number, the manufacturing date, and the glass makeup. That label is the single most important thing to have when matching rollers, tracks, or replacement panels.

The OEM-versus-aftermarket decision matters with CWS doors more than most brands. CWS uses a proprietary roller housing on several of their 801 Series buildouts, which means a generic roller from a big-box store will ride too high or too low in the track. We stock genuine CWS rollers for all series and quality aftermarket equivalents only where the fit is verified. The honest answer: if your CWS door is under 15 years old, go OEM. If it’s older and CWS has discontinued the part, a measured aftermarket component can work, but only if the installer checks the wheel diameter, housing width, and axle length against the original. We do exactly that before we quote the part.

Westlight Windows Fort Lauderdale is an independent service provider. We are not affiliated with CWS, but we install and service their products daily, along with PGT, CGI, and ES Windows products for homeowners who want all their doors working the way they should.

Signs Your CWS Sliding & Patio Doors Is Failing

• The door drags or requires force to open. This is almost always a worn roller, and if it’s a single roller that has failed, the weight shifts onto the remaining one and wears a groove into the track. That groove is the reason half the replacements we quote in Fort Lauderdale also need a track cap or full track replacement.
• Water pools on the interior tile after a hard rain. CWS doors rely on a weephole drainage system at the bottom rail. When those weepholes clog with salt-air debris or the weatherstripping at the sill loses compression, water backs up into the room. This is one of the most common calls we get in the residential pockets east of Federal Highway, where the salt exposure accelerates wear on vinyl strips.
• The lock set will not throw or the latch does not catch. CWS mortise locks depend on alignment between the panel and the jamb. Once the rollers sag enough to drop the panel a quarter inch, the lock points ride out of position. Even if you replace the lock, it will not solve the problem until the panel height is corrected.
• The glass fogs between the panes. If your CWS door has an insulated glass unit and the seal has broken, you’ll see condensation trapped inside that won’t wipe off. South Florida humidity finishes off a failed seal quickly.
• You feel a draft or see daylight at the top or bottom corner. CWS doors use wool pile weatherstripping at the header and vinyl sweeps at the bottom rail. Once those compress or disintegrate, the door won’t seal, which drives up cooling costs and invites insects.

Replacement Cost & What’s Included

Here is what CWS sliding and patio door repairs and replacements actually cost in the Fort Lauderdale market, parts and labor included:

• Roller replacement (pair): $85 – $220, depending on series and whether the track needs cleaning or repair
• Lock set replacement: $140 – $310, including re-alignment of the panel so the new lock catches cleanly
• Weatherstripping replacement (full perimeter): $120 – $260 for proper compression and weephole service
• Track repair or track cap installation: $180 – $450, depending on the damage and whether we can cap the track or the full track rail must come out
• Single panel replacement (non-impact, standard size): $800 – $1,400 installed
• Full sliding door replacement (impact-rated, standard 72×80): $2,800 – $5,800 installed, depending on frame finish and glass package

The range exists because no two CWS doors we see in Fort Lauderdale are in identical condition. Some need only a roller swap. Others need a roller swap, a track cap, and new weatherstripping before the door will work right. We always give you a written line-item price before any work begins, so you’ll know the part cost, the labor cost, and the total before a single screw turns. Every installation carries a written workmanship warranty, and if something fails during the guarantee period, we return and correct it at no charge under the Kingswell Guarantee and our 365-Day Done Right Promise.

DIY or Call Us?

There are a few things any Fort Lauderdale homeowner can safely check before picking up the phone. Look at the bottom track: if it’s packed with sand or leaf debris, clean it out and see if the door glides easier. Inspect the weepholes along the exterior bottom rail and clear them with a pipe cleaner. If the door still drags or leaks after those two checks, stop there. Removing a sliding door panel from a CWS frame requires lifting the panel out of the track, and depending on the glass package, some of these panels weigh between 120 and 350 pounds. A panel that heavy can drop fast if the rollers pop or the frame binds, and that’s how shoulders, countertops, and glass get destroyed. The roller housing replacement itself requires working inside a tight bottom rail with spring tension clips that will launch across the yard if you don’t know the release direction.

If the door is lifting, leaking, or refusing to lock, the better move is to let a trained technician handle it. We’ll match the part to your series, check track wear while the panel is off, and correct any alignment problem so the new part doesn’t fail the same way the old one did. Call Westlight Windows Fort Lauderdale at (754) 354-5397 for a straight answer and a free estimate.

FAQs

Call Westlight Windows Fort Lauderdale

If your CWS sliding or patio door is dragging, leaking, or won’t lock, call us at (754) 354-5397. Owen Satterfield and the Westlight Windows Fort Lauderdale crew will give you a straight diagnosis, match the right part for your CWS series, and hand you a written price before any work begins. We answer the phone with a live person, 24 hours a day, 7 days a week, and we’ll schedule an estimate at a time that works for you. Tell me what the house needs, and we’ll figure out the rest from there.

Written by Owen Satterfield, Owner, Westlight Windows Fort Lauderdale at Westlight Windows Fort Lauderdale, serving Fort Lauderdale and nearby areas.