New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ViewLux Window Installation: The Fort Lauderdale Owner’s Guide
ViewLux window installation in Fort Lauderdale typically runs $145 – $310 per window for a full install when you’re working with an existing ViewLux frame that’s still square and structurally sound. We stock ViewLux-compatible hardware and glass packs on our trucks, and most single-unit installations are completed the same day we arrive. The way most homeowners find us is simple: they notice a draft that wasn’t there last year, or a sash that suddenly binds when they try to open it, or a fogged pane that won’t clear no matter how much sun hits it. That’s usually when the phone rings, and Owen Satterfield or one of our techs picks it up live, any hour of the day.
Which ViewLux Models This Applies To
ViewLux builds a few distinct window lines, and the part you need depends on which one is in your house. The ViewLux aluminum single-hung and horizontal roller lines are the ones we see most often across Fort Lauderdale, especially in homes built or renovated between roughly 2005 and 2020. These use a narrower frame profile than ViewLux’s impact-rated series, which matters because a roller assembly or balance shoe from a standard single-hung will not seat correctly in an impact frame, even if it looks close on a workbench.
If you’re not sure which line you have, look for the silver manufacturer sticker on the inside of the frame or the head of the sash. It’ll show a series number, usually something like VSH, VHR, or VIM. Grab a photo of that sticker before you call anyone. It saves a second trip. Where it matters most: the impact series uses heavier glass packs and stainless steel hardware that’s specific to those frames, and mixing in aftermarket parts from the standard line will leave you with a sash that binds or a seal that fails early. We carry both OEM ViewLux parts and proven aftermarket equivalents for the non-impact lines. For impact-rated ViewLux windows, we always recommend OEM, and we’ll tell you straight if that’s what your house needs.
Signs Your ViewLux Window Installation Is Failing
- Condensation trapped between the panes. The desiccant seal inside the insulated glass unit has given up, usually due to sustained heat and humidity cycles South Florida hands out every summer. Once you see fog between the glass, the unit needs replacement; there’s no drying it out.
- The sash drops when you let go. On single-hung ViewLux windows, this means the block-and-tackle balance or spiral balance has lost tension. It’s not rare on windows that face direct afternoon sun in Fort Lauderdale, where the heat and salt air work on the internal springs.
- You have to lift or shove the sash to get it moving. Roller assemblies on ViewLux sliders wear flat over time, especially in homes near the Intracoastal where fine sand gets into the track. When the rollers grind instead of roll, the frame wears faster too.
- A soft hiss or whistle near the frame on windy days. The weatherstripping or the corner seal in the frame has compressed or split. In a Fort Lauderdale storm season, that leak gets worse fast.
- Water staining on the interior sill after a steady rain. The weep system or the glazing gasket has failed. In ViewLux aluminum frames, clogged weep holes are common, but a cracked corner weld is what usually causes actual interior damage.
Replacement Cost & What’s Included
Here’s the honest math for ViewLux window installation in Fort Lauderdale. A standard glass pack replacement, parts and labor, usually runs $145 – $230 per unit. A full sash replacement, where the frame stays and we pull the old sash and drop in a new one, typically lands between $210 – $310 per window. If the frame itself has twisted or the corner joints are compromised, you’re looking at a full window replacement rather than a part swap, and that’s a different conversation, one we’ll have with a written price before any work starts.
Every ViewLux installation we do includes new weatherstripping, a cleaned and re-lubricated track, and a written guarantee on the work. That guarantee is part of the Kingswell Guarantee, and it’s handed to you in writing when the job’s done. No revised invoice at the door. No change orders that appear out of nowhere. If the repair fails within the guarantee period, we come back and fix it at no charge. That’s the whole point of the thing.
DIY or Call Us?
You can safely check a few things yourself: photograph the manufacturer sticker, note which window and which room, and clear any loose debris from the track with a vacuum. That’s genuinely useful information to have ready when you call. What you shouldn’t do is try to remove a ViewLux sash with the balance under tension, especially on a single-hung. Those springs carry real force, and if one lets go while your fingers are in the track, you’re having a bad day. Same goes for impact glass packs; they’re heavy, they’re tight in the frame, and dropping one costs more than the service call.
Tell me what the house needs, and we’ll figure out the rest from there. Owen’s been straight with Broward County homeowners long enough to know that most ViewLux failures are simple fixes when you match the right part to the right series. We’ll come out, look at the sticker, measure the frame, and give you a written price before anything gets unscrewed. Call (754) 354-5397 and you’ll get a live person, not a phone tree.
FAQs
In our experience, the glass seals on non-impact ViewLux units in South Florida typically last 8 – 12 years before the heat and humidity win, while the mechanical parts like rollers and balances usually need attention around the 10-year mark. Salt air near the coast accelerates both. Call (754) 354-5397 and we’ll tell you what your specific window is likely facing.
Yes, if the frame is still square and the issue is a failed glass pack, a worn roller, or a lost balance, we repair it on-site rather than replacing the entire window. The frame itself is the line; once the aluminum is twisted or the corner welds fail, repair stops making sense and we’ll recommend replacement with a written quote.
Most single-window part swaps take between 45 and 90 minutes once we’re on site, and we carry the common ViewLux parts on the truck so we can usually finish in one visit. Impact glass packs and full sash replacements can take a little longer, and we’ll tell you the window of time before we start.
We stock the most common ViewLux hardware and glass packs for the standard single-hung and roller lines on our trucks, along with parts for PGT, CGI, and CWS. For less common ViewLux impact-series parts, we order OEM and typically have them in hand within a few business days. Call (754) 354-5397 with your series number and we’ll tell you exactly what’s available.
Written by Owen Satterfield, Owner, Westlight Windows Fort Lauderdale at Westlight Windows Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.