New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ViewLux Sliding & Patio Doors: The Fort Lauderdale Owner’s Guide
We stock and install ViewLux-compatible sliding and patio door parts across Fort Lauderdale, with most roller, handle, and lock replacements running $180 – $420 installed depending on the part and your door’s configuration. If your ViewLux slider is grinding, sticking, or won’t latch, we can usually match the part and have it fixed the same week we see it. The way most Fort Lauderdale owners discover a failed part is simple: one morning the door takes real muscle to move, or the handle spins without catching, or the lock that used to click now just rattles. None of that fixes itself, and waiting usually makes the track or the frame worse.
Key Takeaways
- We stock common ViewLux rollers, handles, and lock sets in our Fort Lauderdale shop, and we order the odd sizes direct.
- Most sliding door part replacements cost between $180 – $420 installed, with a written price before we start.
- Salt air and humidity in Fort Lauderdale destroy rollers and tracks faster than the manufacturer’s average lifespan suggests.
- We are an independent Westlight Windows Fort Lauderdale crew, not a ViewLux factory service center, so we stock alternatives that fit the same door when an OEM part is discontinued or backordered.
- Every job gets a written guarantee, and if the repair fails within the guarantee period, we come back at no charge.
Which ViewLux Models This Applies To
ViewLux makes two sliding door families we see most often in Broward County: the S-700 series, which is the mid-range vinyl slider common in condos and older single-family homes, and the S-900 series, which is the wider-stile, impact-rated line found on a lot of the newer construction along Las Olas and the barrier island. Rollers are different between them: the S-700 runs a 1-inch tandem roller assembly in most production years, while the S-900 typically uses a taller, adjustable steel-ball roller carrier that sits in a deeper track. Get that wrong and you’ll fight the door forever.
If your label is gone (or faded past reading, which happens fast in a south-facing Fort Lauderdale jamb), measure the door slab thickness at the edge. S-700 panels sit at 1-3/4 inches; S-900 panels measure 2-1/4 inches. That one measurement sorts the parts catalog for us faster than any serial number.
On the parts side we make an honest call: OEM ViewLux parts match the door as it left the factory, but ViewLux has changed part suppliers at least twice over the years, and some older Fort Lauderdale units are waiting on a part that simply isn’t in production anymore. When that happens we carry a quality aftermarket equivalent that fits the slot and does the same job, and we tell you before we install it, with the same guarantee either way. We also stock compatible parts for PGT, CGI, and CWS sliders if you have more than one door from a previous owner’s project.
Signs Your ViewLux Sliding & Patio Doors Is Failing
- The door drags or scrapes when you slide it. This is almost always the rollers. On ViewLux S-700 doors, the nylon wheel surface wears flat over time, especially when sand from the beach or a dog’s paws gets ground into the bottom track. You’re pushing metal against aluminum once that happens.
- The handle spins without moving the latch. The interior spindle gear inside the handle set (the part that transfers your wrist motion to the hook latch) is cast zinc on a lot of ViewLux doors and eventually strips. It’s a small part, but it means the door won’t lock until it’s changed.
- The lock cylinder turns but the bolt won’t throw. Fort Lauderdale humidity gets into the lock body through the keyway, and the brass or pot-metal internals corrode. Salt air up along Fort Lauderdale Beach makes this happen years faster than a house ten miles inland.
- The door sits lower on one side and rubs the frame. Adjustable rollers eventually lose their adjustment, or the screw turns part of the carrier fails. Left alone, the panel drags on the frame and gouges the vinyl.
- Water pools at the threshold after rain. That’s usually the weatherstrip or threshold cap, not the door slab itself, but it rots the subfloor if ignored through a South Florida summer. A bad threshold lets water in slowly enough that you’ll smell it before you see where it got in.
Replacement Cost & What’s Included
Here in Fort Lauderdale, an installed roller replacement for a ViewLux slider runs $180 – $280 for a single door panel depending on whether it’s an S-700 (simpler carrier) or an S-900 (taller stainless carrier, more expensive part). A new handle set runs $140 – $220 installed. A lock cylinder or complete lock body is typically $120 – $190 installed. If the track is worn or the threshold needs replacing along with the rollers, figure $320 – $450 for the full job on most six-foot doors.
Every price is the price before we touch the door. We hand you a written number, and we don’t knock on the door later with a change order. That’s the Kingswell Guarantee and it applies to a $140 handle set the same as a whole-house window package. Same goes for the 365-Day Done Right Promise: if the part we installed fails within the guarantee period, you call us and we come back and correct it at no charge. For a door you use fifty times a day, that’s not a perk, it’s the only reason to pay a professional instead of guessing off a YouTube video.
DIY or Call Us?
What you can safely do: clean the bottom track with a stiff brush and soapy water, check for an obvious obstruction, and note whether the door is rubbing left, right, or center so you can describe it to us on the phone. That’s useful information and zero risk. What you should not do: lift a 120-pound glass panel out of its frame by yourself, especially a ViewLux S-900 impact panel, which is heavier and has less room to maneuver. A sliding door panel that tips can shatter tempered glass, crush fingers, or take out a wall corner. We see homeowners attempt this once or twice a year in Fort Lauderdale and it never saves money.
The honest split: if the door drags and the track is clean, you almost certainly have a bad roller, and no amount of silicone spray touches a flat-spotted nylon wheel. That’s a bench job for a technician with the right carrier puller. Call us at (754) 354-5397 and describe the symptom; Owen Satterfield will tell you what the house needs, and we’ll figure out the rest from there.
FAQs
In Fort Lauderdale’s salt air and humidity, expect 6 – 10 years from a ViewLux roller set before the nylon wheels flatten or the bearings seize, less if the door faces the ocean or the track never gets cleaned. We replace rollers that have failed at the 5-year mark on beachside condos more often than you’d guess. Call (754) 354-5397 and we’ll give you an honest read on whether yours are shot.
Handles and lock cylinders can sometimes be cleaned and re-lubricated, but a stripped spindle gear or a corroded lock body needs a new part, not a patch job. Rollers are always replacement, never repair, because the wheel surface is the part that wears. Call us and we’ll tell you which category yours falls into.
Most single-part replacements, a roller set, a handle, a lock cylinder, run 45 minutes to an hour and a half once we’re on site. A full roller plus threshold job takes longer, closer to two hours, because the panel comes out and goes back in. We’ll give you a real arrival window when you book.
We stock the common ViewLux S-700 and S-900 rollers, handle sets, and lock bodies in our Fort Lauderdale stock, and we order unusual sizes direct, which usually takes a few business days. If your door takes a part we carry, we can often have it installed the same week you call.
If your ViewLux sliding or patio door is dragging, sticking, or won’t lock, call Westlight Windows Fort Lauderdale at (754) 354-5397 for a free estimate. We’ll give you a written price before any work starts, show up in the window we gave, and back the repair with a written guarantee.
Written by Owen Satterfield, Owner, Westlight Windows Fort Lauderdale at Westlight Windows Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.