CGI Sliding & Patio Doors Nationwide

CGI Sliding & Patio Doors: The Fort Lauderdale Owner’s Guide

We stock and install CGI-compatible sliding and patio door parts across Fort Lauderdale, with most roller, track, and lock replacements running $220 – $480 installed depending on your CGI model and what’s actually worn out. The typical homeowner discovers the problem the same way: the door starts grinding instead of gliding, or it takes a real shoulder shove to move a door that used to open with two fingers. In a salt-air climate like Fort Lauderdale, the rollers and bottom tracks are almost always the first parts to go – they’re the lowest point on the door, and they collect everything the wind blows in from the ocean.

Call (754) 354-5397

Here’s what to know before you call anyone: CGI builds impact-rated sliding doors in several distinct series, and the rollers that fit a 1980s-era CGI aluminum slider won’t fit a modern CGI Estate Collection or Targa impact unit. Matching the part to the specific door matters more than matching it to the brand name. We’ll help you sort that out over the phone in about five minutes, and if we carry the part on the truck – which we do for most CGI models sold in Broward County – we can usually schedule the job the same week.

Key Takeaways

• Most CGI sliding door roller and track replacements in Fort Lauderdale cost $220 – $480 installed, with full lock-set replacement running $180 – $350.
• CGI makes multiple series with different roller specs – the part must match your exact door series, not just the brand.
• We stock OEM and quality aftermarket parts for CGI doors, plus components for PGT, CWS, and ES Windows units.
• Salt air and sand grit in Fort Lauderdale shorten roller life to roughly 8 – 12 years even on well-maintained doors.
• Direct pricing on CGI Sliding & Patio Doors parts in Fort Lauderdale: (754) 354-5397 for a written quote before any work starts.

Which CGI Models This Applies To

CGI has manufactured sliding glass doors and patio doors for decades, and the parts aren’t one-size-fits-all. The main series you’ll find in Fort Lauderdale homes include the CGI Estate Collection, the CGI Targa impact line, and older CGI Classic aluminum sliders installed from the late 1980s through the early 2000s. Each series uses its own roller carriage geometry, track profile, and lock-set dimensions. If you grab a generic roller off a hardware store shelf, it might physically clip into place and still bind within a month because the wheel diameter or bracket offset is wrong.

The most reliable way to identify your CGI door is to check the glass etching or the frame label. CGI marks most impact-rated glass with a permanent etching in one corner that includes the manufacturing date and impact test standard. The frame itself usually carries a small sticker or stamped metal tag on the top or side rail with the series name and production code. Take a photo of that label before you call. It saves a return trip.

One compatibility gotcha we run into constantly in Fort Lauderdale: homeowners with original builder-grade CGI sliders from the 1990s who upgrade to impact glass in one section of the house, then try to use parts interchangeably between old and new units. The track heights differ, sometimes by as little as 3/16 of an inch, and that’s enough to make a new roller bind or a lock set misalign. We’re an independent service provider – not affiliated with CGI – and part of what we do is help you sort out which parts actually match the door you own, not the door you wish you owned.

Signs Your CGI Sliding & Patio Doors Is Failing

• The door grinds or vibrates when sliding. This is the classic roller failure: the wheel bearings wear out, the wheel develops flat spots, or the roller bracket bends from a door forced past debris in the track. The grinding sound is metal on metal. It only gets worse.
• You have to lift or yank the door to move it. When the rollers collapse or the track wears down, the door’s weight drops onto the bottom rail and drags. In Fort Lauderdale, we also see aluminum frames corrode from decades of salt exposure, which makes the problem worse because the frame itself deforms.
• The lock won’t throw or the handle spins freely. CGI sliding door locks use a hook-style mechanism that engages a keeper in the jamb. Sand and salt grit work their way into the lock body, the hook wears, or the handle spindle strips. On impact-rated CGI doors, a broken lock is also a security issue – that door is your hurricane barrier.
• Water pools at the interior side of the track after rain. CGI doors use weep holes along the bottom track to drain water that gets past the glass. In Fort Lauderdale’s afternoon downpours, those weeps clog with dirt and salt residue. Water then backs up and finds its way past the track seal. This is usually fixable with cleaning, but if the track itself is pitted or corroded, replacement is the right call.
• The door is hard to close the last two inches. That’s typically an alignment problem: the adjusting screw on the roller has backed out, or the top track guide is worn. On older CGI doors, the stainless steel track can also develop a lip where the roller rides, which effectively creates a speed bump at the end of travel.

Replacement Cost & What’s Included

For CGI sliding and patio door part replacements in Fort Lauderdale, here’s what we quote:

• Roller replacement (both panels): $220 – $380 installed
• Bottom track replacement: $300 – $480 installed
• Lock set and handle replacement: $180 – $350 installed
• Full roller, track, and lock overhaul: $450 – $700 installed

The price range depends on your door’s series, whether the track needs to be cut to length on site or arrives pre-sized, and whether your frame has corrosion that needs addressing before new parts go in. Every quote includes the part, the labor, cleanup, and a written price handed to you before any work begins. We don’t revise the number at the door. If we find something unexpected mid-job, we stop, explain it, and get your sign-off first. Owen Satterfield and the crew have been doing this long enough to know the Kingswell way: say the price before the work, show up when we said we would, leave the place cleaner than we found it, and put the guarantee in writing. If the replacement part fails within the guarantee period, we come back and fix it at no charge. That’s automatic, not something you have to negotiate for.

DIY or Call Us?

Sliding door rollers and tracks aren’t high-tension components like garage door springs, but they’re also not as forgiving as swapping a light fixture. The door itself weighs 100 to 200 pounds on most CGI sliders, and lifting a stuck door panel out of its track without the right grip and a second set of hands is how people end up with crushed toes or a cracked glass panel – and on impact-rated CGI doors, a cracked panel is a $1,000 mistake minimum.

What you can safely do yourself: clean the track with a vacuum and a stiff brush, clear the weep holes with a piece of wire, and spray a dry silicone lubricant on the track. That’s it. If the rollers are collapsed, the track is pitted, or the lock won’t engage, that’s a parts replacement job. We keep a rolling stock of CGI rollers, tracks, and lock sets on the truck for the models we see most often in Fort Lauderdale, and if your door is one of those, we can usually have you sorted in a single visit. Call (754) 354-5397 and describe what you’re seeing, or text a photo of the door and the frame label. Tell me what the house needs, and we’ll figure out the rest from there.

How Long Do CGI Sliding Door Parts Last in Fort Lauderdale?

In Fort Lauderdale’s salt-air and sand environment, most CGI sliding door rollers last 8 to 12 years before they need replacement. Doors on the east side of the house, facing the ocean breeze, tend to wear faster than those on the west side. If you’re at the 10-year mark and the door is getting stiff, it’s worth having us inspect the rollers before they damage the track – a roller replacement is cheaper than a track replacement. Call (754) 354-5397 for an exact assessment.

Can the Rollers Be Repaired Instead of Replaced?

No. Once a roller’s internal bearings go, the wheel and bracket are done – there’s no servicing them. What sometimes looks like a roller problem is actually just debris in the track, so we always clean and test first before quoting a replacement. If the track itself is pitted or has a wear lip, the new rollers will just grind against it, so both get replaced together. Call (754) 354-5397 and we’ll tell you which fix your door actually needs.

How Long Does the Swap Take?

Most CGI sliding door roller and lock replacements take 1 to 2 hours on site, including cleanup and a final slide test. Full track replacements can run 2 to 3 hours because the old track gets removed, the frame surface gets cleaned and prepped, and the new track gets set and sealed. We’ll give you a committed arrival window before the visit. Call (754) 354-5397 to schedule.

Do You Stock CGI Parts or Do I Have to Wait for an Order?

We stock the most common CGI roller sizes, track profiles, and lock sets on the truck, so many Fort Lauderdale jobs get done same-visit. If your door is an older or rarer CGI series, we’ll order the part and let you know the exact lead time before you approve anything. Call (754) 354-5397 with your door’s model info and we’ll tell you on the spot what’s available.

Written by Owen Satterfield, Owner, Westlight Windows Fort Lauderdale at Westlight Windows Fort Lauderdale, serving Fort Lauderdale and nearby areas.