CWS Windows & Doors in Hollywood, FL

CWS Windows & Doors in Hollywood, FL | Westlight Windows Fort Lauderdale

We provide independent CWS window and door service across Hollywood, FL, from tune-ups and hardware replacement to our Window Replacement in Hollywood and full insert rebuilds. The one thing that makes our CWS work here different is that we’ve engineered repair approaches specifically around Hollywood’s historic-district rules and salt-heavy coastal air. If your CWS 4700 sliders are grinding or your 9520 sashes won’t stay up, call (754) 354-5397 and we’ll give you a straight answer about whether it’s worth fixing.

Call (754) 354-5397

We’re Westlight Windows Fort Lauderdale, and we’ve been taking apart CWS window and door systems along the Broward County coast long enough to know which parts fail first and why. We’re not a manufacturer shop. We don’t pretend to be factory authorized. What we are is an independent outfit that knows CWS hardware inside out, and that independence means we can repair honestly instead of pushing replacement when a $40 roller kit will do the job.

Why Hollywood Residents Choose Us for CWS Service

Most window companies in Hollywood will tell you they “work on all brands.” Ask them to name the failure point on a CWS 4700 horizontal roller and you’ll get a blank look. Our crew can name it because we’ve replaced enough of them: the stainless roller carriers corrode from salt spray, the nylon wheels delaminate, and the panel jumps the track. Same story with the CWS 9520 single hung balances that lose tension after repeated hurricane-driven rain cycles. We know these systems the way a mechanic knows a specific engine.

Owen Satterfield, the owner here at Westlight Windows Fort Lauderdale, trained in building construction technology at Los Angeles Trade-Technical College before spending nearly two decades putting windows into South Florida homes. He’s quick to tell you what a house actually needs rather than what sounds good on a quote sheet. Around Hollywood, that instinct matters, because a lot of the homes here are 60-year-old CBS ranches and mid-century originals that punish generic repair work.

Common CWS Windows & Doors Problems We Solve in Hollywood

• CWS 4700 horizontal rollers seizing from sand and salt scale. Within a few blocks of Hollywood Beach, the fine sand and salt in the air get into the bottom track and chew up roller wheels. Panels start grinding, then jump track entirely. We rebuild the carriers with marine-grade rollers and re-machine the track so the door glides instead of fighting you.
• CWS 9520 single hung sashes that slam shut or refuse to stay open. The balance springs inside the jamb lose tension after repeated exposure to wind-driven rain. It’s a common problem in Hollywood’s older ranch homes, where single hungs from the 2000s are now hitting the end of their balance life. We replace the balances with stainless or sealed equivalents and restore the sash travel.
• CWS casement multipoint lock handles that spin without engaging. The gearbox inside the lock body corrodes from salt air intrusion, especially in homes near the Intracoastal. The handle turns, the pins don’t throw, and the window won’t seal. We replace the gearbox with a sealed marine-grade unit and re-lube the pins, which typically fixes the problem without replacing the whole sash.
• Blocked weep holes on CWS fixed and picture windows. On Hollywood’s older CBS homes, the sill weep system gets clogged with salt crust and debris, so condensation builds up inside the frame and stains the drywall beneath the window. We clear the weeps, flush the sill track, and verify drainage before the stain spreads further.
• Interior-mount retrofit complications in Hollywood Lakes. The city’s preservation board frequently requires impact windows to mount on the interior of the original frames. That’s a finicky installation most out-of-town crews get wrong. We’ve built reversible interior-mount brackets that pass board review and keep the CWS sash serviceable from inside, so you don’t end up with a window that looks right but can’t be maintained.

CWS Service in Hollywood: What Local Conditions Mean for Your Equipment

In the Hollywood Lakes historic district, the city’s preservation board routinely requires impact-rated CWS replacement windows to be installed on the interior side of existing original frames. What that means for a CWS owner is simple: you can’t just yank the old frame and drop in a stock insert. The interior mount has to preserve the vintage street-facing appearance while still meeting Miami-Dade wind-load standards. A lot of contractors get tripped up on this and end up installing something that fails board review, costing the homeowner months of delay. We’ve engineered reversible interior-mount brackets and sightline-preserving sill adapters that keep CWS sashes fully serviceable from inside while the original frame stays untouched on the exterior. In practice, this matters most on streets like Polk and Van Buren, where the homes were built in the late 1950s and early 1960s and the board is strict about every visible line on the facade. Our tech just finished a job on Polk Street in Hollywood Lakes where a 1962 ranch had CWS 4700 horizontal rollers so corroded from salt spray that the panels had ground aluminum filings into the bottom track. We rebuilt the carriers with marine-grade stainless rollers, re-machined the track, and adjusted the interlock, then recommended an annual maintenance plan because the home sits two blocks from the Intracoastal. The owner said she hadn’t opened that slider in three years, and now it glides with one finger. That’s the kind of repair that would fail again within a year if you used standard rollers.

CWS Models & Products We Service in Hollywood

We work on every major CWS line you’re likely to find in a Hollywood home: the 9520 single hung, 4700 horizontal roller, 7550 casement, and 9650 fixed/picture. For discontinued hardware, we don’t just shrug and sell you a whole new window. We source marine-grade aftermarket components: corrosion-treated rollers, stainless balances, sealed gearboxes. In many cases these outlast the original CWS parts because they’re built for saltwater exposure, not just inland use. If the frame is still structurally sound, we’ll tell you that an insert rebuild will restore weather-tightness for years at a fraction of replacement cost. If the frame has lost integrity, we’ll tell you that too. Honesty beats a sale we’d have to apologize for later. See our full CWS sales & service page for what we cover around Broward County.

CWS Service Pricing in Hollywood

FAQs – CWS Windows & Doors in Hollywood

Can you repair my CWS impact window if the glass is intact but the roller track is corroded from salt air in Hollywood?
Yes, and this is one of the most common jobs we do in Hollywood, especially on 4700 horizontal rollers near the Intracoastal and along the beach. We replace the corroded carriers with marine-grade rollers, re-machine the track if it’s been gouged, and adjust the interlock so the panel seals properly. The glass stays in place the whole time. Call (754) 354-5397 for an exact quote.

Does Hollywood’s historic preservation board actually require CWS impact windows to mount on the interior of original frames?
In the Hollywood Lakes historic district, yes, the board frequently requires interior mounting to preserve the street-facing look of original frames. We’ve engineered reversible interior-mount brackets and sill adapters that pass board review, and we handle the paperwork before installation starts. That’s a difference-maker most contractors miss. Call (754) 354-5397 and we’ll explain what your specific house needs.

Which CWS single hung window model is most common in older Hollywood ranch homes, and what typically fails on it?
The CWS 9520 single hung shows up all over the ranchers built in Hollywood between 1955 and 1975. The most common failure is the balance springs losing tension after repeated exposure to wind-driven rain, which makes the sash slam shut or refuse to stay open. We replace the balances with sealed or stainless units and the window works like it should. Call (754) 354-5397 to get a price.

How do you handle a CWS casement window where the handle spins but the lock won’t engage?
That’s the gearbox inside the multipoint lock body failing from salt air corrosion. We replace the gearbox with a sealed marine-grade unit, re-lube the locking pins, and verify all points engage before we leave. We save the original handle and trim whenever possible so the window looks unchanged. Call (754) 354-5397 to schedule a look.

Does your annual maintenance plan for CWS windows include cleaning hidden weep holes on Hollywood ranch homes?
Yes. Weep holes are the most overlooked failure point on Hollywood’s older CBS houses. Our maintenance plan includes flushing the weep system on every CWS fixed and picture window, clearing any salt crust, and verifying drainage so you don’t get drywall staining under the sill. It’s a small job that prevents a big one. Call (754) 354-5397 and we’ll walk you through what’s included.

Service Areas Near Hollywood

We run CWS service throughout central and southern Broward County. That includes Hollywood, CWS service in Cooper City to the west, CWS service in Fort Lauderdale to the north, plus Sunrise, Margate, Wilton Manors, and the surrounding neighborhoods. If you’re not sure whether we cover your street, call and ask, we’ll tell you straight. Our full Hollywood service area page shows the exact reach.

Book Your CWS Service in Hollywood Today

Tell me what the house needs, and we’ll figure out the rest from there. Call (754) 354-5397 to schedule your free estimate. A live person answers, day or night, and we’ll get you a written price before any work begins.

Written by Owen Satterfield, Owner at Westlight Windows Fort Lauderdale, serving Hollywood since 2009.