New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Sliding & Patio Doors: The Fort Lauderdale Owner’s Guide
We stock and install ES Windows-compatible sliding and patio door parts across Fort Lauderdale, with most roller, track, and handle replacements running $180 – $420 installed. If you call before noon on a weekday, we can usually have a technician out the same day with the part in hand. Most homeowners find out a part has failed the hard way: the door starts sticking in the channel, the lock won’t catch, or the panel suddenly feels twice as heavy as it did last month. Salt air and humidity in Fort Lauderdale don’t cause these failures overnight, but they sure speed them up once the factory grease dries out.
Which ES Windows Models This Applies To
ES Windows builds sliding doors under several series lines, and the part that fits one series won’t always fit another. The most common lines we see in Fort Lauderdale homes are the 7000 series and the 8000 series impact-rated sliders. The easiest way to identify yours is to look for the ES Windows sticker on the door frame edge, usually near the bottom corner of the fixed panel. That sticker carries the series number, the glass spec, and in some cases the original order code. If the sticker’s gone, measure the visible glass width in inches. ES sliders in this market run from 60 inches up to 144 inches for two-panel configurations, and the roller hardware changes at the wider end of that range. For ES Windows specifically, OEM rollers are worth the extra cost on impact-rated doors. Aftermarket rollers work fine on interior or non-rated sliders, but the OEM roller matches the factory track profile better, and that matters more than most folks expect. We’re an independent service provider, not affiliated with ES Windows, and we’ll tell you straight whether OEM or a quality aftermarket equivalent makes sense for your door.
Signs Your ES Windows Sliding & Patio Doors Is Failing
- Door drags or grinds when you slide it. This is almost always the roller bearings, which seize up once salt air and fine sand work their way past the factory seals. The door still works, but the strain gets worse until a roller cracks.
- Panel has a loose, rattling feel in the track. Worn rollers lose their grip on the track profile. The door will still close, but you’ll notice extra play when you push on the panel corner.
- Lock or latch won’t line up with the strike plate. As rollers wear unevenly, the door drops. The latch misses the plate by a fraction of an inch, and suddenly the lock you’ve used for years stops engaging.
- Water pools near the interior track after a hard rain. The weep holes in the bottom track clog with Fort Lauderdale dirt and dried salt, and the track drains slow or not at all. This is a maintenance item that turns into a roller killer if left alone.
- Drafts or hot air leaking around the panel edges. Weatherstripping on ES sliders hardens and shrinks in South Florida sun. You’ll feel it most in the late afternoon when the west wall heats up.
Replacement Cost & What’s Included
In Fort Lauderdale, you’ll typically pay $180 – $420 to replace rollers, tracks, or handle and lock hardware on an ES Windows sliding door. The low end covers a basic two-roller swap on a standard 60-inch door. The high end covers an impact-rated door with four rollers, a new track insert, and latch hardware. The bigger spread comes down to what the door needs once we open it up: sometimes the track is fine and only the rollers are done, sometimes the track has grooves worn into the aluminum and needs a replacement insert. Every quote is a written price before any work starts, parts and labor separated so you can see exactly what you’re paying for. Our workmanship carries the 365-Day Done Right Promise: if that repair fails within the year, we come back and fix it at no charge.
DIY or Call Us?
You can safely clean the bottom track with a stiff brush and clear the weep holes with a small screwdriver. That solves a lot of sticking problems without touching the door panel itself. But lifting an ES Windows slider off its rails is a two-person job on anything over six feet, and impact-rated glass panels in Fort Lauderdale homes can weigh 180 pounds or more. A blown-out back or a shattered panel costs a lot more than a service call. If the door needs rollers and you’re not sure, call (754) 354-5397 and describe what you’re hearing. We’ll tell you over the phone whether it sounds like a track cleaning or a hardware replacement.
FAQs
In Fort Lauderdale’s salt air and humidity, factory rollers on ES Windows sliders typically last 6 to 10 years before bearings start to seize. Doors on the east side or within a mile of the beach trend toward the shorter end of that range. Call (754) 354-5397 and we’ll inspect the rollers and give you an honest read on what’s left in them.
Yes, in most cases the individual part is replaceable, and you’ll pay $180 – $420 instead of $2,500 and up for a new impact-rated door. The exception is when the frame itself is bowed or the glass seal has failed, which is a different conversation. We always identify the exact failed part before recommending anything.
A standard roller and track service on an ES Windows slider takes about 60 to 90 minutes once the technician is on site. If the track needs a full insert replacement, budget an extra half hour. We’ll give you a real arrival window when you book the visit.
Our trucks carry the most common ES Windows roller sizes, track inserts, and handle sets, and we also keep inventory in our Fort Lauderdale shop for the less common series. If your door needs something outside that stock, we can usually have it in hand within two to three business days. Call (754) 354-5397 with your door’s sticker info and we’ll check before scheduling.
No. The price we give you in writing before the job is the price you pay. If we open the door and find something unexpected, we stop, explain it, and get your sign-off before doing anything beyond the original scope. That’s the Kingswell Guarantee, and it’s been the rule on every job since 2009.
Why Fort Lauderdale Homeowners Call Westlight for ES Windows Repairs
Owen Satterfield and our crew spend more time in the field than behind a desk, which means we pick up on things you won’t find in a manufacturer spec sheet. Like how ES Windows sliders installed along the Las Olas Boulevard corridor in the early 2010s tend to fail on the latch side first, because that’s where the morning sun hits the track and bakes the grease out. We’re an independent Westlight Windows Fort Lauderdale location, and we carry parts for ES Windows as well as PGT, CGI, CWS, and the other brands we stock. Tell me what the house needs, and we’ll figure out the rest from there. Call (754) 354-5397 for a free estimate and a straight answer.
Written by Owen Satterfield, Owner, Westlight Windows Fort Lauderdale at Westlight Windows Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.