ES Windows Window Installation Nationwide

ES Windows Window Installation: The Fort Lauderdale Owner’s Guide

ES Windows window installation in Fort Lauderdale typically runs between $190 and $430 per window when you’re replacing a failed unit, with most jobs completed in under two hours for a standard horizontal roller or fixed lite. We stock the common ES Windows frame gaskets, rollers, balances, and locking hardware on our trucks, so a service call doesn’t usually drag into a second visit. What we see most often: a window that started off sliding smoothly has slowly become a two-hand shove, or worse, it’s dropped into the track and won’t seal against the frame anymore. That’s when South Florida air starts doing what South Florida air does.

Call (754) 354-5397

Which ES Windows Models This Applies To

ES Windows makes several series lines, and the hardware differs between them. The two you’re most likely to find in Broward County homes are the 7000 series (single-hung and horizontal roller) and the 9000 series (impact-rated, common in pre-2005 buildings that were later upgraded to meet Miami-Dade code). A quick way to identify yours: open the sash and look for a white manufacturer sticker on the top edge of the frame or along the side jamb. It’ll list the series number, the glass make-up, and a lot code. If the sticker has faded or been painted over (we see this constantly in oceanfront condos along A1A and Galt Ocean Mile), you can measure the visible glass width. Most 7000 series rollers sit under a sash that’s wider than 24 inches; the 9000 series uses a heavier stainless track and a thicker frame profile. One compatibility gotcha we run into in Fort Lauderdale: the 7000 and 9000 series roller assemblies are not interchangeable. A homeowner who orders a generic adjustable roller online often discovers the wheel diameter is off by 2 millimeters, which is enough to make the sash bind. We keep both OEM rollers and a quality aftermarket equivalent on the truck, and we’ll match what’s already in your frame rather than what’s cheapest to source.

Signs Your ES Windows Window Installation Is Failing

• The sash drops when you let go. This means the balance mechanism (either a spiral balance or a block-and-tackle unit, depending on your series) has lost tension. In Fort Lauderdale’s salt air, the internal spring corrodes faster than it would inland, and a sash that won’t stay put is the first sign it’s about to go.
• You can hear air whistling through the meeting rail on windy days. The weatherstripping along the interlock has compressed or torn. We see this constantly in Victoria Park and Rio Vista homes where the prevailing breeze hits the same elevation year after year. The fix is fresh OEM-profile weatherstripping, which reseats the seal.
• The lock won’t engage or feels mushy when you turn it. The die-cast lock cam inside the housing has worn or cracked. On ES Windows specifically, the lock body is riveted into the sash, so we replace the entire assembly rather than just the cam. It’s a ten-minute fix once you have the right part.
• The window is suddenly hard to slide or makes a grinding noise. The roller bearings have flattened, which happens after years of fine Fort Lauderdale sand working its way into the track. Replacing the rollers before the track itself gets scored will save you from needing a full frame service.
• Condensation has formed between the two glass panes. That’s a failed seal on the insulated glass unit, not a failure you can ignore. If you’re seeing this on an ES Windows 9000 series impact unit, it’s typically a sign the original install put too much stress on the frame, which we can address during the replacement.

Replacement Cost & What’s Included

Here’s the straight pricing for Fort Lauderdale ES Windows repairs. Every estimate includes parts and labor together, so there’s no “oh, and then the part showed up and it cost extra” conversation. We give you the written price before any work starts, and that’s the price you’ll see on the invoice.

• Roller replacement (set of 2, standard 7000 series): $190 – $260 installed
• Roller replacement (set of 2, 9000 series impact-rated): $240 – $320 installed
• Balance replacement (single sash): $160 – $230 installed
• Weatherstripping replacement (full window perimeter): $120 – $190 installed
• Complete lock assembly replacement: $145 – $210 installed
• Failed insulated glass unit replacement (single window): $280 – $430 installed depending on glazing package

The price difference on those roller ranges comes down to what’s actually in your frame. A 7000 series standard roller is a simple nylon-and-steel wheel. A 9000 series uses a heavier stainless housing and a sealed bearing, because that’s the one carrying an impact-rated sash. On the glass replacement, the price climbs if your original unit had low-e (a thin coating that reflects heat back out in summer) or a specific tint. We use exact-size order glass rather than trimming a stock panel. You’ll also get our written warranty on the work, and under the 365-Day Done Right Promise, if the same part fails within the first year, we return and fix it at no charge.

DIY or Call Us?

Some ES Windows parts are genuinely owner-serviceable: cleaning the track, re-siliconing the exterior seam, or snapping in a new cosmetic cover are all reasonable weekend jobs. What’s not reasonable is pulling a 9000 series impact sash off its track to reach the roller assembly, because that sash can weigh 45 pounds or more, and once it’s free of the frame, the balance springs are still under tension. The mechanics of an ES Windows roller swap involve compressing the spring-loaded housing, lining up the replacement wheel, and reseating the sash in a way that doesn’t bind the lock. It goes wrong in ways that bend frames and pinch fingers. Call (754) 354-5397 for a free estimate, and we’ll bring the right OEM or compatible part with us. Tell me what the house needs, and we’ll figure out the rest from there.

FAQs