Mr-Glass Window Replacement Nationwide

Mr-Glass Window Replacement: The Fort Lauderdale Owner’s Guide

If you have a Mr-Glass window with a failed part, we stock and install Mr-Glass-compatible replacement windows across Fort Lauderdale, with most single-window replacements running $450 – $950 installed depending on size, glass package, and frame condition. The typical swap takes 2 – 4 hours once the unit is on site, and our trucks carry the most common Mr-Glass replacement hardware for same-visit fixes when the frame is sound. Most homeowners discover the problem the way you probably did: a window that suddenly won’t close flush, condensation that won’t wipe away, or a crank handle that spins without moving the sash.

Call (754) 354-5397

We’re an independent Fort Lauderdale window company that carries the Mr-Glass line alongside seven other manufacturers. We’re not affiliated with Mr-Glass corporate, but we’ve installed and serviced their products long enough to know exactly which parts fail, which ones hold up, and what’s worth replacing versus what’s worth saving. And because we’re a Kingswell location, you’ll get your price in writing before any work starts. No door-step revisions, no fuzzy math.

Which Mr-Glass Models This Applies To

Mr-Glass windows and doors come in several series, and the replacement parts are not universal across all of them. The most common models we service in Fort Lauderdale are the Mr-Glass single-hung and horizontal slider lines, plus their impact-rated casement and picture window series. If you still have the original paperwork, look for a white label on the window frame or sash edge. It’ll show a model number starting with “MG-” followed by a series code. No label? Measure the visible glass width and height to the nearest 1/8 inch, and take a clear photo of the corner welds and the hardware from the inside. The weld pattern and hardware style are the fastest way we identify a Mr-Glass unit on a service call.

One compatibility gotcha we see regularly: Mr-Glass impact windows built before roughly 2015 used a slightly different balance shoe design than current production runs. If you’re trying to match an older unit on one side of a room and want the windows to look identical, you need to know the production date, not just the series. Aftermarket balance shoes and pivot bars exist and work fine for most Mr-Glass models, but OEM replacements are the safest call when the window is still under the manufacturer’s structural warranty. We’ll tell you which makes sense for your specific unit. We also stock parts for PGT, CGI, and CWS windows, so if your house has a mix of brands from a previous owner, one call covers it.

Signs Your Mr-Glass Window Replacement Is Failing

• Fog or condensation between the panes. This means the sealed unit has lost its argon or krypton gas fill and the desiccant inside the spacer is saturated. In Fort Lauderdale humidity, once the seal goes, the glass fogs permanently and the insulating value drops to nearly zero. The only real fix is a new insulated glass unit.
• The sash won’t stay up or is hard to lift. Balance shoes, spiral balances, or block-and-tackle systems wear out, especially in coastal air where salt accelerates corrosion. The window either slams shut or requires two hands to move. A failed balance puts strain on the frame and locks.
• Crank handles spin freely or grind. The operator gear inside casement and awning Mr-Glass windows is a common failure point. The teeth strip over time, and once they’re gone, the window won’t open or close properly. The gear is replaceable; the window usually isn’t the problem.
• Air leaks around the sash even when closed. Worn weatherstripping or a warped rail lets conditioned air escape. In a Fort Lauderdale summer, you’ll feel it as a hot draft right at the window edge. If the frame is straight, new weatherstripping often solves it; if the frame has sagged, the window needs replacement.
• Visible cracks in the glass or frame welds. Impact-rated Mr-Glass windows can take a hit but not always survive it. A crack radiating from the corner or a broken weld at the sash corner is structural. Don’t wait on this one. A compromised impact window won’t perform its job in the next hurricane.

Replacement Cost & What’s Included

In Fort Lauderdale, most Mr-Glass single-window replacements run $450 – $950 installed for standard sizes with clear or low-e glass (a thin coating that reflects heat back into the room in winter and out in summer). Larger picture windows, impact-rated glass packages, and windows requiring frame or stucco repair push into the $950 – $1,800 range. The price you get from us is a written line-item quote: the window unit, the labor, the sealants, the haul-away, and the tax. Since we work the Kingswell Way, you’ll see the price before we order a single part, and it won’t change when the crew arrives.

Here’s how a typical Mr-Glass window replacement breaks down:

• Replacement insulated glass unit (IGU): $180 – $420 depending on glass type and size
• Replacement balance shoes, pivot bars, or operator gears: $35 – $140 per window when the frame is intact
• Full window replacement (frame + glass + hardware): $450 – $950 installed for standard sizes
• Impact-rated Mr-Glass replacement: $700 – $1,800 installed depending on size and pressure rating

Every job carries a written guarantee. If the repair fails within the guarantee period, our 365-Day Done Right Promise means we return and correct it at no charge. That’s the rule, not a favor.

DIY or Call Us?

Here’s the honest split. You can safely check a few things yourself: confirm the window is closed and locked, look for debris in the track, and wipe down the weatherstripping. That’s where safe DIY ends on a Mr-Glass window. Balance shoes and springs are under tension and can snap hard enough to take off a fingertip. Removing an insulated glass unit without the right tools and experience risks breaking the frame or shattering the glass. And once a sill or frame is involved, you’re into stucco work, flashing, and waterproofing that needs to be right the first time.

If the window is fogged, cracked, sagging, or refusing to stay open, call us at (754) 354-5397. We’ll send a background-checked, uniformed technician to look at the window, measure what needs measuring, and hand you a written price before any work begins. Tell me what the house needs, and we’ll figure out the rest from there.

FAQs