Mr-Glass Windows & Doors Service Nationwide

Why Fort Lauderdale Homeowners Choose Mr-Glass Windows & Doors

Mr Glass in Fort Lauderdale provides a specialized trade, and it’s one we’ve done for years as an independent provider, not a factory-authorized dealer. We rebuild and maintain the Mr-Glass 7700, 8700, 9900, and 5500 series across the city’s condo towers, canal-side homes, and older ranches. The reason homeowners call us instead of a handyman? We know how these specific profiles, balances, and glazing systems fail in coastal humidity and salt air, and we stock or can source the right parts fast. If you need a Mr-Glass window repaired or a door adjusted, call (754) 354-5397 for a free estimate. We’re not authorized by Mr-Glass, and we’ll never pretend otherwise. We’re a local Fort Lauderdale window and door company that has fixed enough Mr-Glass hardware to know it inside out.

Call (754) 354-5397

Key Takeaways:

• We independently service all major Mr-Glass window and door series in Fort Lauderdale, including the 7700, 8700, 9900, and 5500.
• We use genuine Mr-Glass hardware when available and match proven aftermarket parts when it isn’t, always with coastal corrosion in mind.
• Every job follows the Kingswell Guarantee: written price first, a real arrival window, a clean job site, and a written guarantee on the completed work.
• 365-Day Done Right Promise: if the work isn’t right within the guarantee period, we return and correct it at no charge.

Why Trust Westlight Windows Fort Lauderdale for Your Mr-Glass Windows & Doors?

We’ve pulled apart enough Mr-Glass sashes and tracks in Fort Lauderdale to know the difference between a ten-minute hardware fix and a window that’s reached the end of its service life. Our technicians are trained on Mr-Glass balance systems, roller assemblies, and casement operators. Every service call is handled by a background-checked, uniformed tech who knows Mr-Glass hardware by feel, not by a manual. We carry matched aftermarket spiral balances, roller kits, cam pivots, and weatherstripping that hold up in coastal conditions, and we order genuine Mr-Glass parts when the manufacturer still lists them and the price makes sense. Owen Satterfield, our owner, has been putting windows and exterior doors into South Florida homes for the better part of two decades, including whole-house impact projects along the Las Olas Boulevard corridor. He’d tell you that Mr-Glass windows are good windows, but in coastal Fort Lauderdale, every brand’s hardware has a breaking point. Our job is to know that point and fix things before a $40 balance failure becomes a $600 full-frame replacement.

We are an independently owned and operated Kingswell location, not a Mr-Glass dealer. That means we answer to you, not to a manufacturer’s sales program. We tell you the truth about what your Mr-Glass window needs, even when that means recommending a full-frame replacement from another line we install, like PGT or ECO Window Systems. It’s the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.

Common Mr-Glass Windows & Doors Problems We Fix in Fort Lauderdale

Every window brand has its habits. After years of servicing Mr-Glass windows in Fort Lauderdale’s salt-heavy air, here are the failures we see again and again:

• Mr-Glass 7700 Series Single Hung: dropped sashes. The spiral balances inside the side jamb lose tension over time, especially in coastal humidity that accelerates internal corrosion. You’ll notice the sash won’t stay up or slams down unless propped. We replace the balances, re-tension the system, and adjust the cam pivot so the sash holds at any height.
• Mr-Glass 8700 Series Double Hung: cracked glazing beads and weak locks. Fort Lauderdale’s sun bakes vinyl glazing beads until they turn brittle. When the bead cracks along the lock rail, the glass can seat improperly and the sash loses its seal. We fit new beads, inspect the weatherstripping, and replace worn cam pivots so both sashes operate smoothly.
• Mr-Glass 9900 Series Horizontal Roller: jammed or skipping tracks. Beach air pushes fine sand and salt grit into the roller assemblies. The rollers grind, corrode, and eventually skip or bind. We pull the panel, clean out the track, and install matched aftermarket stainless or marine-grade roller kits that tolerate Fort Lauderdale’s coastal abrasion better than the original nylon rollers.
• Mr-Glass 5500 Series Casement: stripped crank operators. The gear teeth inside the crank operator corrode after a few seasons of exposure to salt air, then strip when you force the sash open. We replace the operator and the hinge hardware, then lube the assembly with a marine-grade compound that slows future corrosion.
• Mr-Glass door weatherstripping failure on canal-side homes. Homes along Fort Lauderdale’s canals and the Intracoastal see accelerated rubber and pile weatherstripping degradation. We replace Mr-Glass door sweeps, thresholds, and perimeter gaskets with materials rated for high-moisture, high-wind exposure.

Mr-Glass Parts & Our Repair-vs-Replace Approach

Here’s our honest rule: if the Mr-Glass frame is still square and solid, we repair. If the glazing shows fatigue cracks from years of salt and thermal cycling, we tell you straight that our Window Replacement services are the honest move. We don’t patch a dying frame to win a job. We’d rather tell you the truth on the front end than have you call us back in six months with the same problem.

For parts, we use genuine Mr-Glass hardware when it’s still manufactured and priced sanely. When a Mr-Glass part has been discontinued or costs three times what it should, we match a proven aftermarket component, and we’re specific about what we’re installing and why. Spiral balances, roller kits, cam pivots, and weatherstripping are all items where a quality aftermarket part can outlast the original in a coastal environment. Glazing beads and glass, we always match exact sightlines and sealant chemistry. If you’re wondering whether your Mr-Glass window needs a hardware fix or a full swap, call (754) 354-5397 and we’ll give you a straight answer. Every estimate is written before any work starts, and that price doesn’t change at the door.

Our Mr-Glass Service Process – Step by Step

1. 1
   Diagnosis. Our tech inspects the Mr-Glass hardware, sash alignment, tracks, and glazing beads. We identify whether the failure is isolated (like a dropped 7700 sash with bad spiral balances) or systemic (like a frame that’s drifting out of square from years of thermal cycling).
2. 2
   Written quote. Before any work starts, you get a line-item written price. No door-step revisions. This is the Kingswell Guarantee, and it applies to every single Mr-Glass service call we run in Fort Lauderdale.
3. 3
   Repair or install. We replace the bad hardware, re-glaze where needed, and re-align the sash or door. For full-frame replacements, we follow Fort Lauderdale’s High Velocity Hurricane Zone codes and install to current wind mitigation standards.
4. 4
   Testing. We cycle the sash or door through its full range of motion, check seal pressure, and confirm the hardware holds. If it slips or binds, we fix it before we leave.
5. 5
   Written guarantee. Every job ends with a written guarantee. If the repair fails within the guarantee period, we return and correct it at no charge. That’s the 365-Day Done Right Promise in action.

Mr-Glass Products We Service & Install in Fort Lauderdale

We service and install the full range of Mr-Glass window and door products, including Mr-Glass Windows & Doors in Cooper City, FL, and commonly found in Fort Lauderdale homes: the 7700 Series Single Hung, 8700 Series Double Hung, 9900 Series Horizontal Roller, and 5500 Series Casement. For single and double hung windows, we handle balance replacement, cam pivot swaps, glazing bead replacement, and sash re-alignment. For horizontal roller windows, we rebuild tracks and replace roller assemblies. We also provide window maintenance and care services, including track cleaning, weatherstripping replacement, and hardware lubrication with marine-grade compounds. Our local stock includes the most common Mr-Glass balances, rollers, and weatherstripping profiles, which means most Fort Lauderdale repair calls don’t wait on a parts shipment.

We Also Service These Brands

We’re a Mr-Glass specialist, but not a single-brand shop. Westlight Windows Fort Lauderdale installs and services windows and doors from eight manufacturers, including impact-rated lines like PGT and CGI, energy-focused ECO Window Systems, and entry and patio doors from Therma-Tru. If your Fort Lauderdale home has a mix of brands, one phone call covers it.

FAQs – Mr-Glass Windows & Doors Service in Fort Lauderdale

Why does my Mr-Glass 7700 single hung drop when I raise it, and can it be fixed?
Yes, a dropped 7700 sash is almost always a spiral balance issue. The balances inside the side jamb lose tension from age and coastal corrosion, and the sash will not stay up. We replace both balances, re-tension, and adjust the cam pivot. The fix usually takes under an hour per window. Call (754) 354-5397 for a written quote.

Can you replace just the rollers on a Mr-Glass 9900 horizontal slider?
Yes. The 9900 roller assemblies pick up sand and salt grit from beach air and eventually jam or skip. We pull the panel, clean the track, and install matched aftermarket rollers built for coastal use. If the track itself is pitted or bent, we’ll show you and talk through whether a track repair or replacement makes sense. Estimates are free.

My Mr-Glass casement crank is hard to turn and slips. Is that a window replacement situation?
Almost never. On the 5500 Series casement, a slipping crank usually means the operator gear has stripped from corrosion or force. We replace the operator and hinge hardware, then lubricate with a marine-grade compound. A full window replacement is only on the table if the frame itself has fatigue cracks or rot. Call (754) 354-5397 and we’ll tell you straight.

Do you keep Mr-Glass weatherstripping in stock for Fort Lauderdale homes?
Yes. We stock the most common Mr-Glass weatherstripping profiles in our local Fort Lauderdale inventory, including door sweeps, thresholds, and perimeter gaskets. Canal-front homes need this replaced more often, and we quote it as a line-item before starting.

How do I know if my Mr-Glass window needs full-frame replacement instead of hardware repair?
You look at the frame. If the frame is square, the welds are intact, and the glazing is clear, a hardware repair is usually all it needs. If you see hairline cracks in the vinyl at the corners, fogged glass from a lost seal, or soft, rotting wood in older Fort Lauderdale homes, full-frame replacement is the honest move. We’ll show you the evidence on the spot.

How much does Mr-Glass windows & doors service cost in Fort Lauderdale?
Hardware repairs on Mr-Glass windows in Fort Lauderdale typically run $120 to $380 per window, depending on the part and the series. Balance replacement on a 7700 or 8700 is usually in the $140 to $240 range. Roller replacement on a 9900 slider runs $110 to $220. Casement operator swaps on a 5500 run $130 to $260. Full-frame replacement costs vary widely based on size, impact rating, and install complexity. Every quote is written line-item before work starts, and that price does not change at the door. Call (754) 354-5397 for an exact number on your windows.

Book Your Mr-Glass Service in Fort Lauderdale, FL

If your Mr-Glass window is dropping, grinding, or fogging, don’t wait for a failed wind-mitigation inspection or a fully stuck sash. Call (754) 354-5397 to schedule a free estimate. Owen and our Fort Lauderdale crew will diagnose the problem, give you a written price before any work starts, and stand behind the fix in writing.

Written by Owen Satterfield, Owner at Westlight Windows Fort Lauderdale, serving Fort Lauderdale and Broward County since 2009.