Door Installation in Margate - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Margate

Door installation in Margate typically costs between $900 and $4,800 depending on the door type, material, and whether impact-rated glazing is required. Most exterior door replacements in Margate take one to two days once the door arrives, and we schedule a written estimate before any work begins so you know the exact price walking in. Our crew works throughout Margate five days a week, from Oriole Gardens to Margate Gardens and every neighborhood between. If your door is binding, leaking at the sill, or corroded around the hinges, call (754) 354-5397 and we’ll come take a look.

Call (754) 354-5397

We are Westlight Windows Fort Lauderdale, part of the Kingswell network of independently owned and operated locations. Owen Satterfield leads our team, and he has spent sixteen years watching what Margate’s salt air does to doors that were never built for it. We do not sell doors off a truck. We measure the opening, spec the hardware for coastal conditions, and put the price in writing before the first screw comes out.

Why Westlight Windows Fort Lauderdale Is Margate’s Preferred Door Installation Company

Margate homeowners call us because we answer the phone and we show up. Not always the same day, but in the window we gave, on the day we said. That sounds like a low bar, but anyone who has waited through a South Florida summer with a door that will not latch knows how rare it is. Owen Satterfield has built our Margate reputation on a rule he repeats to every new technician: if you would not put that door in your own mother’s house, it is not going in someone else’s.

The Kingswell Guarantee backs every Margate job with four written promises: a written price before work starts, a committed arrival window, a clean job site when we leave, and a written guarantee on the completed work. If a repair fails within the guarantee period, we return and fix it at no charge. That is the 365-Day Done Right Promise. It is not a slogan. It is in the paperwork we hand you at the end of the job.

Margate homeowners also tell us they appreciate knowing who is walking through the door. Every technician we send to Margate is background-checked and uniformed. When you call, a live person answers, 24 hours a day, seven days a week. Not a voicemail tree, not a chatbot. A human who can schedule a measurement or dispatch someone if a door will not close and your house is open to the weather.

Exterior Door Installation in Margate

Exterior Door Installation in Margate is where we see the widest gap between what was originally installed and what the house actually needs. Most Margate homes were built between the 1950s and 1980s, and the exterior door openings were framed for doors that simply were not designed for salt-laden air, hurricane season, or the thermal expansion that comes with 90-degree afternoons in July. A typical exterior door replacement in Margate runs $1,400 to $4,200 installed, with fiberglass doors at the upper end and basic steel doors at the lower end, before impact-rating upgrades are factored in.

What the Job Involves Here

We pull the old jamb, check the concrete block opening for square and true, then shim the new frame into place. On 1960s-era Margate homes, the opening is rarely within an inch of standard, so we cut and plane the jamb to fit rather than forcing the block around the door. We use stainless steel hinges and composite adjustable sills on every exterior door in Margate, because standard steel hardware corrodes within three to five years this close to the Intracoastal.

When Margate Homeowners Call Us

The most common call is a front door that has started binding at the top corner, which usually means the hinge screws have rusted and the slab has shifted. The second most common is a door that leaks at the bottom sweep during a summer downpour. Both are fixable at the replacement stage if the new door is specced for coastal conditions from day one. That is why we do not install inland-spec hardware on Margate exterior doors, period.

French Door Installation in Margate

French Door Installation in Margate is a popular upgrade for owners of 1970s and 1980s ranch homes with rear patios and pool decks. A pair of French doors in Margate typically runs $2,200 to $4,800 installed, depending on whether you want a standard inswing, an outswing for tighter interiors, or impact-rated glazing. The job involves removing the old slider or single door, installing a new header if the opening is wider than the original framing, and setting both slabs so they meet cleanly at the center without sagging.

Coastal Hardware Matters More Than You Think

Margate’s humidity and salt air work on French door hardware the same way they work on everything else. We spec stainless steel hinges, adjustable astragals, and a sill with a thermal break so the aluminum does not sweat and corrode. French doors with steel hinges will start binding within a few years this close to the coast. The coastal-spec version costs a bit more up front, but it operates smoothly for a decade instead of three years.

Replacing Sliders with French Doors

Many Margate homes from the 1970s and 1980s were built with sliding glass doors on the back elevation. When those sliders fail, homeowners often switch to French doors for better security and easier daily use. The opening usually widens by a few inches, so we reframe the rough opening and install a proper header before setting the new doors. It is a two-day job in most cases, and the written quote covers the framing work up front.

Trusted Brands We Service in Margate

We carry and install doors from eight manufacturer lines, including PGT, CGI, and Therma-Tru, because no single brand fits every Margate home. Therma-Tru fiberglass doors hold up well against Margate’s humidity and do not warp or rust the way steel doors do over a decade. PGT and CGI build impact-rated doors that meet High Velocity Hurricane Zone standards, which matters when a hurricane warning puts Margate in the cone. For homeowners who want real product choice matched to the opening, the age of the house, and the exposure to salt air, that matters more than a one-brand contractor’s sales pitch.

Because Margate is our core service area, we keep common replacement parts in stock and can order any Therma-Tru, PGT, or CGI door with a hard lead time instead of a guess. When you call for an estimate, Owen Satterfield or one of our project coordinators will tell you exactly what lead time to expect for the door you choose, not a vague “two to four weeks.”

Common Door Installation Problems We See in Margate Homes

• Rusted hinges and latch plates. Salt-laden air works on standard steel door hardware within three to five years. The hinges rust at the pin, the latch plate corrodes around the screws, and the door starts sagging and binding. We replace everything with stainless steel on Margate exterior doors.
• Corroded thresholds and bottom sweeps. Aluminum thresholds on original 1960s doorways pit and gap where they meet the slab. When a summer thunderstorm drives rain horizontally, water channels under the door and onto the floor inside. A composite adjustable sill and full perimeter flashing fix this at the source.
• Out-of-square concrete block openings. The CMU walls in older Margate homes settle and shift over decades, so the original door jamb might be two inches out of square. A new door cannot fix that by itself; the jamb has to be custom-shimmed and the frame set true before the slab is hung.
• Impact-rated doors on non-impact frames. We see doors with impact glass that were installed on old jamb frames that cannot transfer the load. When wind pressure hits the door, the frame flexes and the door loses its seal. The frame and the slab have to be rated as a system, not just the glass.

Last month we replaced a corroded aluminum exterior door in Oriole Gardens. The original 1963 slab had seized at the threshold because the steel screws and bottom sweep had rusted into a solid crust. Our crew pulled the old jamb, found the concrete opening two inches out of square, and installed a PGT impact-rated fiberglass door with stainless steel hinges, a composite adjustable sill, and a full perimeter of butyl flashing. The homeowner no longer has to shoulder the door open, and the sill gap that used to leak during summer downpours is sealed. That is the difference between replacing a door and rebuilding a doorway.

Pricing for Door Installation in Margate, FL

We Also Serve Cities Near Margate

Our crews work throughout central Broward County, so if you live in Fort Lauderdale or Hollywood, the same Door Installation team that serves Margate can handle your project. The pricing, the guarantee, and the coastal-spec hardware are identical. Call us and we will schedule a measurement at your home.

FAQs About Door Installation in Margate