Horizontal Roller Windows in Fort Lauderdale, FL

Horizontal Roller Windows in Fort Lauderdale, FL

Horizontal roller windows slide side to side on a track instead of swinging open, and in Fort Lauderdale they’re one of the most practical choices you can make for a home that faces salt air, afternoon heat, and the occasional hurricane warning. Westlight Windows Fort Lauderdale installs horizontal roller windows from PGT, CGI, and ES Windows, and we’ve been doing it since 2009 as an independently owned and operated Kingswell location. If you’re weighing whether rollers suit your house, call us at (754) 354-5397 and we’ll talk it through before you spend a dime. For a wider look at what we install across the area, see our Window Installation in Fort Lauderdale page.

What sets a good horizontal roller window apart in this city is how it handles water. Fort Lauderdale gets roughly 60 inches of rain a year, much of it sideways during summer storms. A properly flashed and sealed roller track won’t pool water against the frame, and that’s the difference between a window that lasts 15 years and one that rots out the sill in five. Our crews pay attention to drainage weep holes, sill pitch, and frame anchoring because we’ve repaired enough poorly installed rollers in neighborhoods like Victoria Park, Rio Vista, and Coral Ridge to know exactly where window installation shortcuts show up first.

The name Westlight comes from that late-afternoon sun that pours through a good window: bright, warm, and worth doing right. Owen Satterfield has run this shop on that principle from day one. We don’t rush a window into a rough opening, and we don’t leave until the frame sits square, the rollers glide without drag, and the locking point engages cleanly.

When You Need Horizontal Roller Windows

Not every home needs a horizontal roller. But if any of these sound familiar, you’re likely in roller territory and should give us a call at (754) 354-5397:

• Your current windows are single-hung or awning style and you want easier glass access. Rollers let you wash both sides of the pane from inside the house, which matters when you live on a second story in a neighborhood like Lauderdale Harbors and you’re not dragging a ladder around.
• You have a wide opening where a casement window would sag. French doors aside, horizontal rollers span five to eight feet without the hinge fatigue you’ll see on a heavy casement. We regularly replace sagging casements in mid-century homes around Imperial Point, where those wide, low openings were popular in the 1960s and 70s.
• Your existing rollers stick, jump the track, or whistle when the wind blows. Salt air corrodes cheap roller hardware in three to five years near the Intracoastal. If you live east of Federal Highway, you’ve probably noticed it. We can tell you within ten minutes on the phone whether the track is salvageable or the whole unit needs replacement.
• You’re replacing impact windows and want something that slides clean under pressure. PGT and CGI both build impact-rated horizontal rollers tested to Miami-Dade and Broward county codes. Fort Lauderdale is in a high-velocity hurricane zone, and a roller that isn’t rated for that zone is code-noncompliant. We don’t install anything that isn’t.
• You want better airflow in a hallway, kitchen, or sunroom. Where an awning window only cracks a few inches, a horizontal roller opens half its width, which matters in a city where cross-breezes do the heavy cooling in December and March.
• Your window has failed and you’re not sure what you have. If the frame is soft, the glass is fogged, or the roller’s jumped the track and the frame’s racked, call us. We’ll identify the unit, tell you if it’s a five-hundred-dollar repair or a full replacement, and put either one in writing before any work begins.

Our Horizontal Roller Windows Process

Every horizontal roller installation we do in Fort Lauderdale follows the same sequence, which we call the Kingswell Way near Fort Lauderdale, FL. It’s five promises: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. Here’s how that plays out on a roller job:

1. Phone call and discovery (about 15 minutes). You call (754) 354-5397 and talk to a live person, any hour of any day. We ask what you’re experiencing, what style of window you have now, and roughly when it was installed. If it sounds like a repair rather than a replacement, we’ll tell you that in the first call. No upselling into a full replacement if you don’t need one.
2. Measurement and written price at your home. We come to your house in Fort Lauderdale, measure each rough opening, check the condition of the surrounding frame and lintel, and confirm which of our manufacturer lines fits the job. Then we hand you a written price. That price covers labor, materials, disposal, flashing, trim, and any incidental work we can see. It does not change at the door.
3. Product selection and order. If the opening needs impact rating, we’ll spec PGT or CGI. If energy is the priority and the home isn’t in a wind zone that mandates impact glass, we’ll look at ES Windows or ECO Window Systems. We stock eight manufacturer lines, and the point is matching the product to the job, not forcing one brand onto every opening.
4. Installation day. A uniformed, background-checked crew arrives in the window we committed to. We lay drop cloths inside and out, remove the old unit, repair or replace any compromised framing, set the new roller, flash it for Broward County wind-driven rain, and test the slide and lock several times. If the frame reveals rotted wood or corroded track anchors once the old window is out, we’ll stop, show you the condition, and give you options before proceeding. No surprise charges.
5. Written guarantee and close-out. Before we leave, you get a written warranty on the work and the product. The Kingswell Guarantee covers every promise: the price we wrote, the arrival window we committed to, a clean job site, and the work itself. If anything fails within the guarantee period, we return at no charge and make it right. That’s the 365-Day Done Right Promise, and it’s not negotiable. It’s just how we operate.
6. Follow-up. If a repair fails after we’ve been out for a fix, that second visit is free too. It comes automatically with the job. No arguing with a dispatcher, no “that’s not covered.” We come back.

Horizontal Roller Windows Pricing in Fort Lauderdale

You should know before you call that most horizontal roller window replacements in Fort Lauderdale run between $700 and $1,500 per window installed, depending on size, frame material, and whether you need impact-rated glass. Here’s the honest breakdown:

• Basic aluminum-frame non-impact horizontal roller (36″ x 48″): $700 – $950 installed per window. Aluminum is common in Fort Lauderdale condos and older homes. It handles salt air well if anodized or powder-coated.
• Vinyl-frame horizontal roller (same size): $800 – $1,100 installed. Vinyl insulates better than aluminum and never corrodes, which matters east of US-1 where salt mist rides the morning breeze.
• Impact-rated horizontal roller (PGT, CGI, or ES Windows): $1,100 – $1,800 installed. This is the range for a 36″ x 48″ unit with laminated impact glass, reinforced frames, and Miami-Dade-approved anchoring. Larger openings will push toward the high end of that range and sometimes beyond.
• Custom sizing, low-e coatings, or tinted glass: Add $125 – $400 per window. Low-e glass (a thin coating that reflects heat back out in summer and holds it in during winter) is worth considering on west-facing walls in neighborhoods like Plantation or Davie, where afternoon sun beats on the glass for hours.
• Full-frame replacement with stucco or drywall repair: Add $200 – $600 per opening. If the old frame is rotted or the opening has been patched badly by a previous contractor, we repair it before setting the new window, and you’ll see that in the written price before we start.

What affects the final number on a horizontal roller in Fort Lauderdale: whether the opening is on the first or second story, whether the home is in a wind zone that requires impact glazing, what the existing frame’s condition is, and whether the opening is standard or custom. A 60-inch wide roller in a 1970s house off Bayview Drive will cost more than a 36-inch single or double hung stock size in a 2000s townhouse in Flagler Village.

You’ll get your exact price in writing before any work begins. We don’t quote a range on the phone to get a foot in the door and then revise it up once we measure. The written price is the price, and it covers everything we can see. Call (754) 354-5397 and we’ll schedule a measurement at a time that works for you. The estimate is free.

FAQs – Horizontal Roller Windows

How much does it cost to replace a horizontal roller window in Fort Lauderdale?

Expect to pay $700 to $1,500 per window installed for a standard-size horizontal roller in Fort Lauderdale, with impact-rated units from PGT or CGI running $1,100 to $1,800. Custom sizes, second-story work, low-e glass, and frame repairs all add to the total, so the only way to get a precise number is a measurement at your home. Call (754) 354-5397 and we’ll give you a written price before any work starts. That price won’t change at the door.

Are horizontal roller windows good for hurricane protection in Fort Lauderdale?

Yes, when they’re impact-rated. PGT and CGI both manufacture horizontal roller windows tested to Miami-Dade and Broward county standards for high-velocity hurricane zones, which includes all of Fort Lauderdale, unlike picture and fixed windows that may have different ratings. A non-impact roller installed east of I-95 won’t meet code if the home falls into a wind-borne debris zone, and we won’t install anything that isn’t code-compliant. If you’re not sure whether your home requires impact glazing, call us and we’ll check the wind zone and tell you straight.

Can you replace just the rollers and track, or do I need a whole new window?

Sometimes just the rollers and track. If the frame is sound, the glass is intact, and the opening is square, replacing the roller cartridges and cleaning or replacing the track can cost $150 to $400 per window and extend the life of the unit several years. But in Fort Lauderdale, salt air often corrodes the track channel to the point where the bottom rail has started to rot, and once that happens, a full replacement is the honest call. We’ll tell you which situation you’re in before you pay for anything. Call (754) 354-5397 to talk it through.

Do horizontal roller windows seal well against rain and drafts?

A quality horizontal roller with interlocking meeting rails and a properly pitched track seals well against Fort Lauderdale’s wind-driven rain, but a cheaply built or badly installed one won’t. That’s why we flash every rough opening correctly, level and pitch the track, and test the seal with a pressure inspection on every job. If the window leaks after we install it, that’s covered under the 365-Day Done Right Promise and we come back at no charge.

Why Fort Lauderdale Homeowners Choose Westlight for Roller Windows

The people who call us are usually not calling because they want new windows. They’re calling because the last window guy let them down. Maybe the price changed when the crew showed up. Maybe the window leaked six months in and nobody answered the phone. Maybe the installer left drywall dust in the bedroom and a gap you could see daylight through. Whatever the burn was, they want it done differently this time. Here’s what differently looks like with us:

• Written price before any work starts. You’ll see the total on paper before a screw is turned. That’s not a sales promise, it’s the Kingswell Guarantee, and you get it in writing on every single job, including your horizontal roller installation.
• A real arrival window. We commit to a time range and we show up in it. If something outside our control changes it, we call you. We don’t leave you waiting all day without a word.
• Background-checked, uniformed technicians. You’ll know exactly who’s walking through your door because they’ll be in a Westlight uniform and they’ll have been vetted before they ever step onto your property.
• Live phone coverage 24 hours a day, 7 days a week. When you call (754) 354-5397 at noon or at 2 a.m., a human picks up. Not a voicemail tree, not a chatbot. A real person who can schedule, answer a question, or dispatch someone if you’ve got an emergency.
• Eight manufacturer lines in stock. PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. The job dictates the product, not the other way around.
• 365-Day Done Right Promise. If the work isn’t right within the guarantee period, we come back and fix it at no charge. If that fix ever fails, the second visit is free too. No negotiating, no fine print.

Horizontal roller windows make sense in a lot of Fort Lauderdale homes: they’re easy to operate, they open wide for cross-breezes, and with the right manufacturer they hold up to hurricane code. A home fitted with properly installed rollers stays comfortable, dry, and secure for decades. But the window is only as good as the installation and the company standing behind it. That’s the part we’ve spent the last fifteen-plus years getting right, one opening at a time, from Tarpon River to Middle River Terrace and every neighborhood between. When you’re ready to replace that stubborn, sticking, salt-corroded roller, call us at (754) 354-5397 and get your written price. The estimate costs nothing, and you’ll talk to a person who knows windows.

Written by Owen Satterfield, Owner at Westlight Windows Fort Lauderdale, serving Fort Lauderdale.