New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Cooper City
Window installation in Cooper City usually runs $550 – $1,500 per window for a standard retrofit, while full-frame replacements on older concrete block homes typically land between $900 and $2,200 installed. Those are the ranges we actually quote, not teaser numbers that climb once the old jamb comes apart. If you live along Griffin Road, in Embassy Lakes, or off Stirling Road in the older sections of town, you already know what decades of salty air and hurricane seasons do to original aluminum windows. Call (754) 354-5397 for a free estimate, and we’ll give you a written price before any work starts. That’s the Kingswell Way, and it’s been the same since 2009.
Why Westlight Windows Fort Lauderdale Is Cooper City’s Preferred Window Installation Company
Cooper City homeowners call us because we answer the phone. Not a voicemail box, not a chatbot. A live person picks up 24 hours a day, 7 days a week, and can schedule a walkthrough, answer a question about impact ratings, or send a crew lead to look at a corroded track that’s keeping a sash frozen shut. Owen Satterfield runs our operation, and he’s built the team around a simple rule: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. That’s the Kingswell Guarantee, and every Cooper City job gets it in writing before a single screw turns.
We’re an independently owned and operated Kingswell location, which means we’re not a franchise call center running subcontractors through. Our installers are background-checked, uniformed, and trained on the eight manufacturer lines we carry, including PGT and CGI impact-rated products that meet Miami-Dade County High Velocity Hurricane Zone standards. For Cooper City’s older concrete block homes, that product breadth matters. The right window for a 1972 ranch off Pine Island Road isn’t the same as the right window for a 1990s two-story in Rock Creek, and we match the product to the opening instead of forcing one brand onto every job.
Double Hung Windows in Cooper City
Double Hung Windows in Cooper City are the most common replacement we install in the city’s 1960s through 1990s single-family subdivisions. These are the windows where both sashes move up and down, and in older Cooper City homes the originals were almost always single-hung aluminum units that have since corroded along the tracks. Homeowners come to us when the bottom sash won’t lift without a fight, or when the top sash has been painted shut for a decade. The switch to a modern double hung gives you full top-and-bottom ventilation, which matters when the afternoon heat sits over the Sawgrass and the house hasn’t cooled down since lunch.
Full-Frame Replacement for Old Aluminum Openings
When the original aluminum frame has corroded or the wood buck behind it has rotted from years of unflashed rain, a retrofit insert won’t do the job. We remove the old frame down to the concrete block and install a new buck, flashing, and window. A typical full-frame double hung replacement in Cooper City runs $900 – $2,200 per opening depending on size, glazing, and whether the HOA requires a specific finish or grid pattern.
Impact-Rated Double Hungs for HVHZ Compliance
Cooper City is in Miami-Dade County’s High Velocity Hurricane Zone, which means any new window opening needs impact-rated glazing or shutters to meet code. We install PGT and CGI impact double hungs with laminated glass that stays in the frame even when a 2×4 hits it at 34 mph. For a standard 36-by-60 inch opening, expect $1,400 – $2,200 installed, including the Miami-Dade NOA paperwork your HOA and insurer will want.
Vinyl Windows in Cooper City
Vinyl Windows in Cooper City are the right call for homeowners who want a tight, low-maintenance replacement without the cost of aluminum or wood. Vinyl doesn’t corrode the way the original aluminum frames do, which is exactly the problem we see in the city’s older subdivisions where decades of coastal humidity have eaten through cast aluminum hinges and left white powder caked in the tracks. We carry vinyl lines from ES Windows, ECO Window Systems, and Mr-Glass, and for a standard single-hung vinyl retrofit in Cooper City you’re usually looking at $550 – $1,000 per window installed.
HOA-Approved Styles and Finishes
Many Cooper City communities, including Embassy Lakes and Flamingo Gardens, have architectural review boards that dictate window styles, grid patterns, and frame colors. Before you sign anything, we confirm what your HOA allows and submit the spec sheet for approval. We’ve done enough Cooper City jobs to know which communities want white vinyl with colonial grids and which allow a clean, grid-free picture window.
When Vinyl Is Not the Right Fit
If you have a 1970s concrete block home with original single-hung aluminum windows and the frames are still square, vinyl retrofits can be an affordable path forward. But if the frames are corroded, the tracks are binding, or the flashing never worked in the first place, a vinyl insert installed inside a failing aluminum frame is a short-term fix. We’ll tell you that directly, because a window that leaks in five years costs more than doing the full-frame job once.
Trusted Brands We Service in Cooper City
Our Cooper City crews install from eight manufacturer lines and stock common parts for the brands we service most, including CWS, ES Windows, and Mr-Glass. That means when a job needs a specific hardware set or an odd grid profile, we’re not waiting two weeks on a freight shipment. We match the product to the opening: an ECO Window Systems vinyl single-hung for a clean 1980s retrofit, a PGT impact-rated casement for a corner bedroom that takes the full brunt of a southwest afternoon sun, a Therma-Tru door for the entry facing the street. If you’ve got a brand preference or an existing product that’s still under factory warranty, we’ll work around it. But we’ll also tell you when the warranty is worth less than the paper it’s printed on, which happens more than most people think.
Common Window Installation Problems We See in Cooper City Homes
- Corroded hinges and binding tracks. The original cast aluminum hinges on 1960s and 1970s single-hungs turn to chalk in salty air. When the sash won’t move, people force it, and that’s when jambs snap and glass cracks. By the time we get the call, the opening usually needs a full-frame replacement rather than a hardware swap.
- Failed perimeter sealant on 1980s windows. The caulk line around an original window breaks down in the UV and humidity, and then water wicks into the concrete block. We routinely find hidden mold inside the rough opening when we pull a frame, which is one reason we photograph the opening before anything gets covered back up.
- Undersized wood buck framing. Original wood bucks from the 1970s were often thinner than what modern HVHZ wind loads require. An impact-rated window installed into a twisting buck will rock and leak in a driving rain. If yours is undersized, the fix is a new buck, not a thicker bead of caulk.
- Non-HOA-compliant replacements from previous owners. Sometimes we find a window swapped out by a prior owner with a cheap insert that doesn’t match the community’s approved grid or finish. The HOA sends a letter when they notice. We pull the offending unit and install a compliant replacement, handling the approval process ourselves so you don’t have to argue with an architectural review board.
Pricing for Window Installation in Cooper City, FL
A typical single-window replacement in Cooper City runs $550 – $1,500 for a retrofit insert, while full-frame replacements on older concrete block homes run $900 – $2,200 per opening. Impact-rated glazing from PGT or CGI lands at the higher end, usually $1,400 – $2,200 per window when you factor in the Miami-Dade NOA paperwork. What pushes a Cooper City quote higher than a quote in a city with newer housing stock is what’s behind the old window: corroded buck framing, failed flashing, or an HOA that requires a specific color and finish we need to order. You’ll see every line item on your written estimate before any work begins, and if we open a wall and find something the quote didn’t cover, we stop, show you the problem, and get written approval before we spend another dollar of your money. Call (754) 354-5397 for a free estimate.
We Also Serve Cities Near Cooper City
Westlight Windows Fort Lauderdale provides Window Installation across central Broward County. If you’re in Cooper City or nearby, our crews cover Fort Lauderdale, Hollywood, Sunrise, and Margate with the same written pricing and the same guarantee on every job. Scheduling is coordinated through our South Florida office, and Cooper City jobs are dispatched locally.
Serving Cooper City, FL - Our Local Coverage Area
We’re based in the Cooper City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Cooper City
In Cooper City’s 1960s to 1980s concrete block homes, the inspection usually finds one of three things: corroded aluminum frames that have eaten into the wood buck, failed perimeter sealant that has been letting moisture into the rough opening for years, or undersized original framing that doesn’t meet modern HVHZ wind load requirements. On a recent Embassy Lakes job, we pulled a 1978 original single-hung and found the wood buck was water-damaged behind the jamb because the original builder never flashed the opening. We stopped work, showed the homeowner the damage, and got written approval to repair the buck before installing the new PGT unit. That inspection step is why our written estimate includes allowances for frame repair, not just a line item for the window. Call (754) 354-5397 to schedule a walkthrough.
Most Cooper City HOAs, including those in Embassy Lakes, Flamingo Gardens, and Rock Creek, review window replacements for both appearance and structural integrity. If the original aluminum frame is corroded or the sightline won’t match the community’s approved spec, the architectural review board will often reject an insert because the new window would sit inside a failing frame and eventually leak. The HOA isn’t being difficult; they’re trying to avoid the exact problem of someone installing a cheap insert into a corroded 1978 opening that then rots the block wall. We handle the HOA approval paperwork for you and submit the product spec sheet before installation so there’s no surprise letter after the work is done.
Replacing a window in a 1970s Cooper City home triggers a permit upgrade when the opening is being enlarged, the old buck framing is being replaced, or the new window is moving from a non-impact product to a Miami-Dade HVHZ-rated impact unit. The permit review checks the window’s design pressure rating against where the opening sits on the house. In practice, most full-frame replacements in Cooper City need a permit, and we pull it ourselves. Every permit we open gets inspected and closed out with a passing final, which is part of the written guarantee you receive at job completion.
When the original opening is corroded and the rough dimensions don’t match a stock window, we price the job as a full-frame replacement with a written allowance for buck repair and flashing. That means the estimate says something like: $1,700 for the impact-rated PGT unit, $350 allowance for new wood buck and pan flashing, and $150 for dump fees and perimeter sealant. If the buck is solid once we open it, we don’t charge the allowance and we show you the savings on the final invoice. If it’s worse than expected, we show you the rotted wood and get written approval to exceed the allowance by the exact amount the repair costs. No one in Cooper City should be getting a door-step price revision. Call (754) 354-5397 and we’ll put the numbers in writing.
Impact glazing qualifies for wind mitigation credits in Cooper City when the windows are Miami-Dade County NOA-approved, openables and fixed units alike, and when the installation includes the proper anchoring to the concrete block. PGT’s WinGuard line and CGI’s Sentinel line are what we install most for Cooper City homeowners seeking insurance discounts, typically running $1,400 – $2,200 per opening for standard sizes. Once the job is complete, we provide the NOA number for each unit and the signed permit paperwork so your insurer can process the credit. The window alone doesn’t get you the discount; the documentation does, and that’s part of the job.
Written by Owen Satterfield, Owner at Westlight Windows Fort Lauderdale, serving Cooper City since 2009.
Six Reasons Homeowners Choose Westlight Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.