New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Cooper City, FL | Westlight Windows Fort Lauderdale
If you own a Cooper City home built between the 1960s and 1990s, there’s a good chance your original aluminum windows are CGI products, and after decades of South Florida humidity, they’re showing it. We’re Westlight Windows & Doors, an independent CGI service provider serving all of Cooper City. What makes our CGI work different here comes down to this: we know the exact failure patterns these windows develop in Cooper City’s concrete block homes, and we match every repair or replacement to what your specific HOA will actually approve. Call (754) 354-5397 for a free estimate.
Why Cooper City Residents Choose Us for CGI Service
Owen Satterfield, our owner, has spent the better part of two decades putting in and servicing windows and exterior doors across Broward County, including a stretch of whole-house impact window projects along the Las Olas Boulevard corridor in Fort Lauderdale. That Cooper City Window Installation experience matters when you’re dealing with a CGI window that hasn’t been opened in three years because the hinges seized. We’ve seen that exact problem more times than we can count in Cooper City’s older subdivisions.
Our approach at CGI sales & service starts with one rule: use OEM CGI components wherever possible. Hinges, rollers, weatherstripping – we order factory parts so the fit stays original and your HOA’s approved appearance doesn’t change. When corrosion is bad enough that even fresh hardware would fail within a few years, we’ll recommend aftermarket stainless steel pieces that hold up better in salty air. And we’ll tell you straight if a unit is past saving. Every job gets a written price before work starts, a real arrival window, and a written guarantee when we’re done. Owen’s way of putting it: “Tell me what the house needs, and we’ll figure out the rest from there.”
Common CGI Windows & Doors Problems We Solve in Cooper City
- Seized cast aluminum hinges on single-hung windows. Cooper City’s coastal humidity accelerates corrosion on the cast aluminum hinges of older CGI single-hung windows. The sash gets stiff, then impossible to open. We see this constantly in homes along Stirling Road and in Forest Lake. The fix is usually new hinges and track cleaning, though badly swollen frames need full replacement.
- Roller track pitting on horizontal roller windows. Salt-laden air eats small pits into aluminum roller tracks, which makes the window grind and jam. Cooper City homes built before impact codes went into effect often have horizontal roller windows in bedrooms that now drag. Replacing worn rollers and treating the track usually restores smooth operation, but only if the track hasn’t pitted through.
- Clogged weep holes causing frame deterioration. Older CGI frames rely on small weep holes to drain water that gets past the weatherstripping. In Cooper City’s rainy summers, those holes clog with dirt and sand, trapping water inside the frame. Over years, the aluminum corrodes from the inside out. We clean and clear these during maintenance calls before the damage spreads.
- Worn cam locks on casement windows. Wind-driven rain finds its way through casement windows when the cam locks wear down and no longer pull the sash tight. Cooper City sidesteps the worst of Atlantic storms, but even a line of summer thunderstorms can push water through a seal that’s lost its grip. Replacing the locks and keepers is a quick job that stops leaks before they rot the sill.
- Sliding glass doors that drag or bind. CGI sliding glass doors from the 1980s are common in Cooper City’s original homes. The rollers flatten over decades, the door grinds against the bottom track, and eventually it won’t slide at all. New OEM rollers, a track tune-up, and adjusted height settings make these doors glide again.
CGI Service in Cooper City: What Local Conditions Mean for Your Equipment
Cooper City’s housing stock was built differently than neighboring Davie or Pembroke Pines, and that difference shapes every CGI repair we do here. The original subdivisions like Forest Lake and Rock Creek went up almost entirely as concrete block construction with narrow single-hung aluminum windows, many of them CGI. Those windows have a distinctive look: thin frames, simple silhouette, narrow sightlines that HOAs still enforce today. The problem is that the cast aluminum hinges CGI used on those single-hung units corrode badly in Cooper City’s humid, salt-tinged air. When the hinge swells and seizes, you can’t just swap it and call it done, because the frame itself is often too far gone. What we’ve found works reliably is a full-frame replacement with a current CGI impact-rated model that preserves the original sightline width. That keeps the HOA off your back and gives you a window that actually opens. We did exactly this on a home off Stirling Road in the Embassy Lakes community, where a CGI Sentinel single-hung had locked up completely from hinge corrosion. A full-frame replacement with the original interior trim profile satisfied the HOA, and the homeowner went from a window that wouldn’t budge to one that operates smoothly and carries current HVHZ product approval.
CGI Models & Products We Service in Cooper City
We service the full residential CGI range that shows up in Cooper City homes, including the Sentinel Series, the Estate Collection, the Classic Collection, and the 900 Series. Most original Cooper City installations are Classic Collection or 900 Series single-hung windows in aluminum, while newer impact retrofits are more likely Sentinel or Estate. For hardware like hinges, rollers, and locks, we lean on OEM CGI parts to keep everything original. For glass, we match the original glazing spec and impact rating. We also stock the common hardware items locally so a routine repair in Cooper City doesn’t wait on a slow parts shipment. When a unit is too far gone to repair safely, we don’t patch it, we tell you and quote a current CGI impact-rated replacement.
CGI Service Pricing in Cooper City
Most CGI window repairs in Cooper City run between $180 and $450 per window, depending on what’s failed. A hinge replacement on a single-hung runs toward the lower end. Roller replacement on a sliding door runs higher, usually $250 to $400. Full-frame impact window replacement is a different scale: typically $1,400 to $2,800 per opening installed, including the window, labor, and permit work. What drives the price is the window size, the CGI model you choose, and the scope of stucco and trim work around the opening. Your written estimate spells out every line item before any work starts, and that’s the price you pay, no revised invoices at the door. Call (754) 354-5397 for a free estimate and we’ll measure, inspect, and give you a number that means something.
Serving Cooper City, FL - Our Local Coverage Area
We’re based in the Cooper City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Cooper City
Yes. OEM replacement hinges, rollers, locks, and weatherstripping for older CGI aluminum single-hung windows are still available through authorized parts channels, and we order them regularly for Cooper City repairs. Some legacy hardware has long lead times, so we also keep compatible aftermarket stainless steel hardware on hand for cases where corrosion demands a more durable material. Call (754) 354-5397 and we’ll tell you what’s available for your specific window.
In most cases, the glass unit can be replaced without replacing the entire sash, as long as the frame and hardware are still sound. A failed seal in an impact-rated CGI window usually means moisture between the panes and lost insulating performance, which is a glass-only repair. If the aluminum frame is corroded or the impact laminate is compromised, a new sash or full-frame replacement is the safer call. We’ll inspect and tell you which path makes sense.
We match the new window’s profile, color, and sightline to what your Cooper City HOA has already approved for your community. Most Cooper City HOAs, especially in planned subdivisions like Rock Creek and Forest Lake, require that replacement windows keep the original narrow frame appearance. We bring samples and spec sheets to your HOA application, and we’ve navigated enough Cooper City architectural review boards to know what gets approved and what stalls.
That powder is aluminum oxide, the result of salt in the humid air reacting with the aluminum frame or hardware over years. It’s cosmetic on the surface, but under the finish it can weaken hinges, locks, and welds. In Cooper City, even homes well inland get enough salt-laden air to accelerate this on older CGI windows. We can clean and treat early corrosion; by the time hardware is scaling and flaking, replacement parts are the fix.
Usually, yes. The rollers are replaceable, and once we lift the door out and install new OEM or stainless steel rollers, the dragging stops. The bigger issue is the track itself: years of grit and salt corrosion can pit the aluminum track to the point where new rollers chew up fast. If the track is in good shape, it’s a quick repair. If it’s pitted through, you’re looking at a new door. We’ll tell you which way it goes before you spend a dime. Call (754) 354-5397 for an exact quote, estimates are free.
Service Areas Near Cooper City
We run CGI service and replacement throughout the southwest Broward area. Besides Cooper City itself, our techs are on the road in CGI service in Fort Lauderdale and CGI service in Hollywood on a regular basis. We also cover Sunrise, Margate, and Wilton Manors. If you’re anywhere in the Cooper City service area and need a window that actually opens, call us.
Book Your CGI Service in Cooper City Today
If your CGI windows are sticking, leaking, or locked shut, call (754) 354-5397 now. We’ll schedule your free estimate, give you a written price before any work starts, and fix it right the first time. A real person answers the phone around the clock.
Written by Owen Satterfield, Owner at Westlight Windows & Doors, serving Cooper City since 2009.
Six Reasons Homeowners Choose Westlight Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.